Fiberlock Lag Kote II Asbestos Encapsulant (5 Gallon)
Lag-Kote is a 100% acrylic, high-solids encasement/encapsulation coating, specifically formulated for application over a variety of asbestos containing materials. Tested and EPA accepted at Battelle Laboratories of Columbus, Ohio, under EPA Contract #68-03-2552-T2005, Lag-Kote was found to be an acceptable encapsulant. Lag-Kote was designed to encase asbestos-containing spray-on fireproofing, transite, and thermal insulation. Lag-Kote's viscous formulation minimizes dripping, clean-up and product waste. Lag-Kote provides a smooth, washable, aesthetically superior finish that will provide years of lasting protection. Lag-Kote has excellent resistance to alkalis and can be applied directly over galvanized metal, ferrous metal, masonry or other sound surfaces. UV inhibitors make Lag-Kote suitable for encasement of exterior asbestos containing materials including transite. Lag-Kote is water-base and non-toxic.
DESCRIPTION:
Product No.: 6420 white
Lag-Kote is a 100% acrylic, high solids encasement/encapsulation coating specifically formulated for application over a variety of asbestos containing materials (ACM). Lag-Kote is an EPA accepted coating for the encasement/encapsulation of ACM. It was tested at Battelle Columbus Laboratories of Columbus, Ohio, under EPA Contract
# 08-03-2552-T2005, and found to be acceptable as an encapsulant.
Designed to encase spray-on fireproofing, asbestos-containing plasters and paints, transite, and asbestos-containing thermal insulation, Lag-Kote’s viscous formulation minimizes dripping, clean-up and product waste. Lag-Kote provides a smooth, washable, aesthetically-superior finish that will provide years of lasting protection. Lag-Kote has excellent resistance to alkalis and can be applied directly over galvanized metal,
wood, masonry or other sound surfaces. UV inhibitors make Lag-Kote suitable for encasement of exterior asbestos containing materials. Lag-Kote yields an opaque, bright white finish, or can be factory tinted to meet specific color requirements. Lag-Kote is water-based and non-toxic.
PROPERTIES:
Solids by Weight: 48 +/-2%
Volatile: Water
Average particle size: 0.2 microns
Viscosity @ 77°F: 120-130 Krebs Units
Weight per gallon @ 77°F: 11.7 lbs.
Film Hardness: Excellent
Film Flexibility: Excellent
Impact Resistance: Excellent
Water resistance of dry film: Excellent
Bond Strength to concrete/steel: Excellent
Coverage:
Brush: 125-175 sq.ft./gal. (5 dry mils)
Airless Spray: 600 sq.ft./gal. (1 dry mil)
Fire Rating ASTM E84-81a: Class “A”
(Southwest Research Institute)
Flame Spread: 5
Fuel Contribution: 0
Smoke Density: 0
Dry Time 1 - 2 hours
Shelf Life: @ 77°F, 36 months minimum, (in
original factory sealed containers)
Odor: Applied indoors, virtually odorless
Finish: Slight gloss
Color: Bright White
Packaged: 5 gallon pail
