Armorcote 309 Floorshine is the ultimate floor finish. A 25% solids, metal crosslinked, polymer finish will make your floors look wet even when they are dry.
Some of the benefits of using Floorshine are: superior protection, durability, reparability, black mark & detergent resistant, ultra high gloss, water resistant, non buffable, non scuffing, self-leveling, use with or without sealer, slip resistant (exceeds ASTM standard D2047-82), most suited to high traffic areas, performs exceptionally well with either spray buffing or high speed buffing, V.O.C. Compliant.
Where to use:
- epoxy floor finishes
- vinyl & vinyl asbestos asphalt tile
- concrete
- linoleum
- urethane floor finishes
- sealed terrazzo
- rubber
- composition tile
- wood
Directions for use:
Apply a thin uniform coat of finish to floor with new rayon mop. Allow to dry approximately 30 minutes. We recommend applying 3-4 uniform coats in this manner. Never pour left over finish back into the container to avoid contamination.
Coverage:
1000 - 1200 ft 1st Coat
1500 - 2000 ft 2nd Coat
